Thread (10 messages) 10 messages, 5 authors, 2018-10-19

Re: [PATCH 0/2] boot to a mapped device

From: Kees Cook <hidden>
Date: 2018-09-27 16:36:31
Also in: dm-devel, lkml

On Thu, Sep 27, 2018 at 7:23 AM, Mike Snitzer [off-list ref] wrote:
On Wed, Sep 26 2018 at  3:16am -0400,
Richard Weinberger [off-list ref] wrote:
quoted
Helen,

On Wed, Sep 26, 2018 at 7:01 AM Helen Koike [off-list ref] wrote:
quoted
This series is reviving an old patchwork.
Booting from a mapped device requires an initramfs. This series is
allows for device-mapper targets to be configured at boot time for
use early in the boot process (as the root device or otherwise).
What is the reason for this patch series?
Setting up non-trivial root filesystems/storage always requires an
initramfs, there is nothing
wrong about this.
Exactly.  If phones or whatever would benefit from this patchset then
say as much.
I think some of the context for the series was lost in commit logs,
but yes, both Android and Chrome OS do not use initramfs. The only
thing that was needed to do this was being able to configure dm
devices on the kernel command line, so the overhead of a full
initramfs was seen as a boot time liability, a boot image size
liability (e.g. Chrome OS has a limited amount of storage available
for the boot image that is covered by the static root of trust
signature), and a complexity risk: everything that is needed for boot
could be specified on the kernel command line, so better to avoid the
whole initramfs dance.

So, instead, this plumbs the dm commands directly instead of bringing
up a full userspace and performing ioctls.
I will not accept this patchset at this time.
quoted
quoted
Example, the following could be added in the boot parameters.
dm="lroot,,,rw, 0 4096 linear 98:16 0, 4096 4096 linear 98:32 0" root=/dev/dm-0
Hmmm, the new dm= parameter is anything but easy to get right.
No, it isn't.. exposes way too much potential for users hanging
themselves.
IIRC, the changes in syntax were suggested back when I was trying to
drive this series:
https://www.redhat.com/archives/dm-devel/2016-February/msg00199.html

And it matches the "concise" format in dmsetup:
https://sourceware.org/git/?p=lvm2.git;a=commit;h=827be01758ec5adb7b9d5ea75b658092adc65534

What do you feel are next steps?

Thanks!

-Kees

-- 
Kees Cook
Pixel Security
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help