On Fri, 24 Aug 2018 17:27:40 +0200
Andrew Lunn [off-list ref] wrote:

On Fri, Aug 24, 2018 at 05:08:48PM +0200, Boris Brezillon wrote:

quoted

Hi Bartosz,

On Fri, 10 Aug 2018 10:04:58 +0200
Bartosz Golaszewski [off-list ref] wrote:
  

quoted

+struct nvmem_cell_lookup {
+	struct nvmem_cell_info	info;
+	struct list_head	list;
+	const char		*nvmem_name;
+};  

Hm, maybe I don't get it right, but this looks suspicious. Usually the
consumer lookup table is here to attach device specific names to
external resources.

So what I'd expect here is:

struct nvmem_cell_lookup {
	/* The nvmem device name. */
	const char *nvmem_name;

	/* The nvmem cell name */
	const char *nvmem_cell_name;

	/*
	 * The local resource name. Basically what you have in the
	 * nvmem-cell-names prop.
	 */
	const char *conid;
};

struct nvmem_cell_lookup_table {
	struct list_head list;

	/* ID of the consumer device. */
	const char *devid;

	/* Array of cell lookup entries. */
	unsigned int ncells;
	const struct nvmem_cell_lookup *cells;
};

Looks like your nvmem_cell_lookup is more something used to attach cells
to an nvmem device, which is NVMEM provider's responsibility not the
consumer one.  

Hi Boris

There are cases where there is not a clear providier/consumer split. I
have an x86 platform, with a few at24 EEPROMs on it. It uses an off
the shelf Komtron module, placed on a custom carrier board. One of the
EEPROMs contains the hardware variant information. Once i know the
variant, i need to instantiate other I2C, SPI, MDIO devices, all using
platform devices, since this is x86, no DT available.

So the first thing my x86 platform device does is instantiate the
first i2c device for the AT24. Once the EEPROM pops into existence, i
need to add nvmem cells onto it. So at that point, the x86 platform
driver is playing the provider role. Once the cells are added, i can
then use nvmem consumer interfaces to get the contents of the cell,
run a checksum, and instantiate the other devices.

I wish the embedded world was all DT, but the reality is that it is
not :-(

Actually, I'm not questioning the need for this feature (being able to
attach NVMEM cells to an NVMEM device on a platform that does not use
DT). What I'm saying is that this functionality is provider related,
not consumer related. Also, I wonder if defining such NVMEM cells
shouldn't go through the provider driver instead of being passed
directly to the NVMEM layer, because nvmem_config already have a fields
to pass cells at registration time, plus, the name of the NVMEM cell
device is sometimes created dynamically and can be hard to guess at
platform_device registration time.

I also think non-DT consumers will need a way to reference exiting
NVMEM cells, but this consumer-oriented nvmem cell lookup table should
look like the gpio or pwm lookup table (basically what I proposed in my
previous email).