[PATCH v6 10/24] watchdog: jz4740: Avoid starting watchdog in set_timeout
From: Paul Cercueil <paul@crapouillou.net>
Date: 2018-08-09 21:45:12
Also in:
linux-clk, linux-devicetree, linux-mips, linux-pwm, linux-watchdog, lkml
Subsystem:
ingenic jz47xx socs, the rest, watchdog device drivers · Maintainers:
Paul Cercueil, Linus Torvalds, Wim Van Sebroeck, Guenter Roeck
Previously the jz4740_wdt_set_timeout() function was starting the timer unconditionally, even if it was stopped when that function was entered. Now, the timer will be restarted only if it was already running before this function is called. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/watchdog/jz4740_wdt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) v6: New patch
diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
index 0f54306aee25..45d9495170e5 100644
--- a/drivers/watchdog/jz4740_wdt.c
+++ b/drivers/watchdog/jz4740_wdt.c@@ -64,13 +64,15 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev, { struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); u16 timeout_value = (u16)(drvdata->clk_rate * new_timeout); + u32 tcer; + regmap_read(drvdata->map, TCU_REG_WDT_TCER, &tcer); regmap_write(drvdata->map, TCU_REG_WDT_TCER, 0); regmap_write(drvdata->map, TCU_REG_WDT_TDR, timeout_value); regmap_write(drvdata->map, TCU_REG_WDT_TCNT, 0); - regmap_write(drvdata->map, TCU_REG_WDT_TCER, TCU_WDT_TCER_TCEN); + regmap_write(drvdata->map, TCU_REG_WDT_TCER, tcer & TCU_WDT_TCER_TCEN); wdt_dev->timeout = new_timeout; return 0;
@@ -86,6 +88,7 @@ static int jz4740_wdt_start(struct watchdog_device *wdt_dev) return ret; jz4740_wdt_set_timeout(wdt_dev, wdt_dev->timeout); + regmap_write(drvdata->map, TCU_REG_WDT_TCER, TCU_WDT_TCER_TCEN); return 0; }
--
2.11.0