Thread (8 messages) 8 messages, 2 authors, 2018-07-24
STALE2871d REVIEWED: 4 (4M)
Revisions (6)
  1. rfc [diff vs current]
  2. v1 [diff vs current]
  3. v2 [diff vs current]
  4. v3 [diff vs current]
  5. v4 [diff vs current]
  6. v5 current

[PATCH v5 net-next 1/6] net: ethernet: ti: cpsw: use cpdma channels in backward order for txq

From: Ivan Khoronzhuk <hidden>
Date: 2018-07-23 21:27:38
Also in: linux-omap, lkml, netdev
Subsystem: networking drivers, the rest, ti ethernet switch driver (cpsw) · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

The cpdma channel highest priority is from hi to lo number.
The driver has limited number of descriptors that are shared between
number of cpdma channels. Number of queues can be tuned with ethtool,
that allows to not spend descriptors on not needed cpdma channels.
In AVB usually only 2 tx queues can be enough with rate limitation.
The rate limitation can be used only for hi priority queues. Thus, to
use only 2 queues the 8 has to be created. It's wasteful.

So, in order to allow using only needed number of rate limited
tx queues, save resources, and be able to set rate limitation for
them, let assign tx cpdma channels in backward order to queues.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Ivan Khoronzhuk <redacted>
---
 drivers/net/ethernet/ti/cpsw.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 00761fe59848..4425b537b9dd 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -968,8 +968,8 @@ static int cpsw_tx_mq_poll(struct napi_struct *napi_tx, int budget)
 
 	/* process every unprocessed channel */
 	ch_map = cpdma_ctrl_txchs_state(cpsw->dma);
-	for (ch = 0, num_tx = 0; ch_map; ch_map >>= 1, ch++) {
-		if (!(ch_map & 0x01))
+	for (ch = 0, num_tx = 0; ch_map & 0xff; ch_map <<= 1, ch++) {
+		if (!(ch_map & 0x80))
 			continue;
 
 		txv = &cpsw->txv[ch];
@@ -2432,7 +2432,7 @@ static int cpsw_update_channels_res(struct cpsw_priv *priv, int ch_num, int rx)
 	void (*handler)(void *, int, int);
 	struct netdev_queue *queue;
 	struct cpsw_vector *vec;
-	int ret, *ch;
+	int ret, *ch, vch;
 
 	if (rx) {
 		ch = &cpsw->rx_ch_num;
@@ -2445,7 +2445,8 @@ static int cpsw_update_channels_res(struct cpsw_priv *priv, int ch_num, int rx)
 	}
 
 	while (*ch < ch_num) {
-		vec[*ch].ch = cpdma_chan_create(cpsw->dma, *ch, handler, rx);
+		vch = rx ? *ch : 7 - *ch;
+		vec[*ch].ch = cpdma_chan_create(cpsw->dma, vch, handler, rx);
 		queue = netdev_get_tx_queue(priv->ndev, *ch);
 		queue->tx_maxrate = 0;
 
@@ -2982,7 +2983,7 @@ static int cpsw_probe(struct platform_device *pdev)
 	u32 slave_offset, sliver_offset, slave_size;
 	const struct soc_device_attribute *soc;
 	struct cpsw_common		*cpsw;
-	int ret = 0, i;
+	int ret = 0, i, ch;
 	int irq;
 
 	cpsw = devm_kzalloc(&pdev->dev, sizeof(struct cpsw_common), GFP_KERNEL);
@@ -3157,7 +3158,8 @@ static int cpsw_probe(struct platform_device *pdev)
 	if (soc)
 		cpsw->quirk_irq = 1;
 
-	cpsw->txv[0].ch = cpdma_chan_create(cpsw->dma, 0, cpsw_tx_handler, 0);
+	ch = cpsw->quirk_irq ? 0 : 7;
+	cpsw->txv[0].ch = cpdma_chan_create(cpsw->dma, ch, cpsw_tx_handler, 0);
 	if (IS_ERR(cpsw->txv[0].ch)) {
 		dev_err(priv->dev, "error initializing tx dma channel\n");
 		ret = PTR_ERR(cpsw->txv[0].ch);
-- 
2.17.1

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help