The WL2868C is an I2C-controlled camera power management IC from Will
Semiconductor. It provides seven programmable LDOs: LDO1 and LDO2 are
fed from a shared VIN12 input and cover 0.496 V to 1.512 V, LDO3 and
LDO4 share VIN34, and LDO5 to LDO7 each have their own input, covering
1.504 V to 3.544 V. All outputs are programmable in 8 mV steps and are
gated by per-output enable bits with a chip-wide SYS_EN master. The
chip also exposes an optional active-low RST_N input.
Its user on the Lenovo Legion Tab (TB322FC, SM8750) is the camera
subsystem: the rear samsung,s5kjns sensor takes DVDD from LDO1, AVDD
from LDO4 and DOVDD from LDO7, and the rear giantec,gt9764 voice coil
motor takes VDD from LDO5 and VDDIO from LDO7. The front sensor is
powered from LDO2, LDO3 and LDO7, but its binding is still pending, so
its supply wiring follows with that series. The board DTS patch of this
series describes the supply wiring that is documented; LDO6 is the only
output with no user on this board.
Signed-off-by: Qianhui Xu <redacted>
---
.../devicetree/bindings/arm/qcom.yaml | 1 +
.../bindings/regulator/willsemi,wl2868c.yaml | 79 +++++++++++++++++++
2 files changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index ff8a35df78..41d5e65c4e 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1168,6 +1168,7 @@ properties:
- items:
- enum:
+ - lenovo,elden
- qcom,sm8750-mtp
- qcom,sm8750-qrd
- const: qcom,sm8750diff --git a/Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml b/Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml
new file mode 100644
index 0000000000..96541870cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/willsemi,wl2868c.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/willsemi,wl2868c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Will Semiconductor WL2868C camera power management IC
+
+maintainers:
+ - Qianhui Xu <xiaqinghuan@mail.ustc.edu.cn>
+
+description:
+ The WL2868C is a camera power management IC with seven programmable LDOs.
+ LDO1 and LDO2 share the VIN12 input and cover 0.496 V to 1.512 V; LDO3 and
+ LDO4 share VIN34, and LDO5 to LDO7 have one input each, covering 1.504 V to
+ 3.544 V. All outputs are programmable in 8 mV steps.
+
+properties:
+ compatible:
+ const: willsemi,wl2868c
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description: Active-low RST_N input.
+
+ vin12-supply:
+ description: Input supply for LDO1 and LDO2.
+
+ vin34-supply:
+ description: Input supply for LDO3 and LDO4.
+
+ vin5-supply:
+ description: Input supply for LDO5.
+
+ vin6-supply:
+ description: Input supply for LDO6.
+
+ vin7-supply:
+ description: Input supply for LDO7.
+
+ regulators:
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ "^ldo[1-7]$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@2f {
+ compatible = "willsemi,wl2868c";
+ reg = <0x2f>;
+
+ regulators {
+ ldo1 {
+ regulator-max-microvolt = <1128000>;
+ regulator-min-microvolt = <1128000>;
+ };
+ };
+ };
+ };
+...--
2.53.0