[PATCH v2 0/2] arm: dts: nxp: imx: add Draeger M48 CPU board

Adds the device trees for “Dräger M48 on NXP i.MX6 (Q|DL) and Intel/Altera
SoCFPGA Cyclone V” board variant.  It has both (the SoC and FPGA) on the
same carrier and they are cross-monitoring each other.  The SoCFPGA boots
independently off qspi flash.

This is the imx6 devicetree part.  There are two bindings as well as device
trees, since M48 is using two parts: imx6q and imx6dl.

new in v2:

  - add the tag from Conor Dooley [off-list ref];

  - it should be clarified that "draeger" vendor prefix is added in
    my previous Draeger M48 patch series;

Petko Manolov (2):
  dt-bindings: arm: fsl: add Draeger M48 dual-cpu board
  arm: dts: nxp: imx: Add devicetree files for M48

 .../devicetree/bindings/arm/fsl.yaml          |   2 +
 arch/arm/boot/dts/nxp/imx/Makefile            |   2 +
 .../boot/dts/nxp/imx/imx6dl-draeger-m48.dts   |  23 ++
 .../boot/dts/nxp/imx/imx6q-draeger-m48.dts    |  23 ++
 .../boot/dts/nxp/imx/imx6qdl-draeger-m48.dtsi | 369 ++++++++++++++++++
 .../boot/dts/nxp/imx/imx6qp-draeger-m48.dts   |  78 ++++
 6 files changed, 497 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-draeger-m48.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-draeger-m48.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-draeger-m48.dtsi
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qp-draeger-m48.dts

-- 
2.47.3