[PATCH 1/6] irqchip/al-fic: use full node name and raise init log level

From
Eliav Farber <hidden>
Date
2026-09-24 06:23:21
Also in
lkml
Reply to
Eliav Farber, 2026-09-24
Use node->full_name instead of node->name in the driver's log messages
so that they identify the specific FIC instance, e.g.:

  interrupt-controller@fd803000 initialized successfully in Legacy mode (parent-irq=3)

Raise the successful-initialization message from pr_debug to pr_info, as
this single boot-time printout is useful when dynamic debug is not
enabled at this stage of boot. While here, fix a small typo in the
al_fic_wire_init() comment.

Signed-off-by: Eliav Farber <redacted>
---
 drivers/irqchip/irq-al-fic.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/irqchip/irq-al-fic.c b/drivers/irqchip/irq-al-fic.c
index d10ac9b63c99..efa7f2b62d00 100644
--- a/drivers/irqchip/irq-al-fic.c
+++ b/drivers/irqchip/irq-al-fic.c
@@ -180,7 +180,7 @@ static int al_fic_register(struct device_node *node,
  * @name: name of the fic
  * @parent_irq: interrupt of parent
  *
- * This API will configure the fic hardware to to work in wire mode.
+ * This API will configure the fic hardware to work in wire mode.
  * In wire mode, fic hardware is generating a wire ("wired") interrupt.
  * Interrupt can be generated based on positive edge or level - configuration is
  * to be determined based on connected hardware to this fic.
@@ -216,8 +216,8 @@ static struct al_fic *al_fic_wire_init(struct device_node *node,
 		goto err_free;
 	}
 
-	pr_debug("%s initialized successfully in Legacy mode (parent-irq=%u)\n",
-		 fic->name, parent_irq);
+	pr_info("%s initialized successfully in Legacy mode (parent-irq=%u)\n",
+		fic->name, parent_irq);
 
 	return fic;
 
@@ -236,30 +236,30 @@ static int __init al_fic_init_dt(struct device_node *node,
 
 	if (!parent) {
 		pr_err("%s: unsupported - device require a parent\n",
-		       node->name);
+		       node->full_name);
 		return -EINVAL;
 	}
 
 	base = of_iomap(node, 0);
 	if (!base) {
-		pr_err("%s: fail to map memory\n", node->name);
+		pr_err("%s: fail to map memory\n", node->full_name);
 		return -ENOMEM;
 	}
 
 	parent_irq = irq_of_parse_and_map(node, 0);
 	if (!parent_irq) {
-		pr_err("%s: fail to map irq\n", node->name);
+		pr_err("%s: fail to map irq\n", node->full_name);
 		ret = -EINVAL;
 		goto err_unmap;
 	}
 
 	fic = al_fic_wire_init(node,
 			       base,
-			       node->name,
+			       node->full_name,
 			       parent_irq);
 	if (IS_ERR(fic)) {
 		pr_err("%s: fail to initialize irqchip (%lu)\n",
-		       node->name,
+		       node->full_name,
 		       PTR_ERR(fic));
 		ret = PTR_ERR(fic);
 		goto err_irq_dispose;
-- 
2.47.3
Thread (9 messages) 9 messages, 2 authors, last reply 2026-09-27
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help