[PATCH v7 7/7] drm/verisilicon: fix DC8200 primary plane disable clearing FB_EN

vs_dc8200_primary_plane_disable_ex() calls regmap_set_bits() on
VSDC_FB_CONFIG_EX_FB_EN instead of regmap_clear_bits(), so disabling
the primary plane on DC8200-family hardware actually leaves the
framebuffer enable bit instead of clearing it.

This bug predates this series: it was carried over unchanged from
vs_primary_plane_atomic_disable() when patch "drm/verisilicon:
introduce per-variant hardware ops table" split the DC8200-specific
implementation out into vs_dc8200.c.

Fixes: dbf21777caa8 ("drm: verisilicon: add a driver for Verisilicon display controllers")
Signed-off-by: Joey Lu <redacted>
---
 drivers/gpu/drm/verisilicon/vs_dc8200.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/verisilicon/vs_dc8200.c b/drivers/gpu/drm/verisilicon/vs_dc8200.c
index f72da10295e1b..25b5906a1c5fc 100644
--- a/drivers/gpu/drm/verisilicon/vs_dc8200.c
+++ b/drivers/gpu/drm/verisilicon/vs_dc8200.c

@@ -70,8 +70,8 @@ static void vs_dc8200_primary_plane_enable_ex(struct vs_dc *dc, unsigned int out
 
 static void vs_dc8200_primary_plane_disable_ex(struct vs_dc *dc, unsigned int output)
 {
-	regmap_set_bits(dc->regs, VSDC_FB_CONFIG_EX(output),
-			VSDC_FB_CONFIG_EX_FB_EN);
+	regmap_clear_bits(dc->regs, VSDC_FB_CONFIG_EX(output),
+			  VSDC_FB_CONFIG_EX_FB_EN);
 
 	vs_dc8200_plane_commit(dc, output);
 }

-- 
2.43.0