[PATCH v7 8/9] arm64: dts: qcom: shikra: Add OPE node
From: Loic Poulain <loic.poulain@oss.qualcomm.com>
Date: 2026-09-15 08:11:21
Also in:
linux-arm-msm, linux-hardening, linux-media, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
From: Nihal Kumar Gupta <redacted> Add the Offline Processing Engine (OPE) device tree node for Shikra. The node describes the six register regions (cdm, top, qos, pipeline, bus_read, bus_write), clocks, interrupt, interconnects, IOMMU mappings, and OPP table. OPE is a memory-to-memory block with no board-level dependencies, so the node is left enabled for all Shikra boards. Signed-off-by: Nihal Kumar Gupta <redacted> Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com> --- arch/arm64/boot/dts/qcom/shikra.dtsi | 77 ++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index 92d22e3b6931cf49f213d1807f78fc1a261f290d..5adc28e9aa64508366e6c7fdad191a152b8cb6dc 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi@@ -1828,6 +1828,83 @@ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, }; }; + isp_ope: isp@5c42000 { + compatible = "qcom,shikra-camss-ope", "qcom,qcm2290-camss-ope"; + + reg = <0x0 0x5c42000 0x0 0x400>, + <0x0 0x5c42400 0x0 0x200>, + <0x0 0x5c42600 0x0 0x200>, + <0x0 0x5c42800 0x0 0x4400>, + <0x0 0x5c46c00 0x0 0x190>, + <0x0 0x5c46d90 0x0 0xa00>; + reg-names = "cdm", + "top", + "qos", + "pipeline", + "bus_read", + "bus_write"; + + clocks = <&gcc GCC_CAMSS_AXI_CLK>, + <&gcc GCC_CAMSS_OPE_CLK>, + <&gcc GCC_CAMSS_OPE_AHB_CLK>, + <&gcc GCC_CAMSS_NRT_AXI_CLK>, + <&gcc GCC_CAMSS_TOP_AHB_CLK>; + clock-names = "axi", + "core", + "iface", + "nrt", + "top"; + + interrupts = <GIC_SPI 209 IRQ_TYPE_EDGE_RISING 0>; + + interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG + &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>, + <&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG + &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "config", + "data"; + + iommus = <&apps_smmu 0x600 0x0>, + <&apps_smmu 0x620 0x0>, + <&apps_smmu 0x640 0x0>; + + operating-points-v2 = <&ope_opp_table>; + power-domains = <&gcc GCC_CAMSS_TOP_GDSC>, + <&rpmpd RPMPD_VDDCX>; + power-domain-names = "camss", + "cx"; + + ope_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-266600000 { + opp-hz = /bits/ 64 <266600000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-465000000 { + opp-hz = /bits/ 64 <465000000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-580000000 { + opp-hz = /bits/ 64 <580000000>; + required-opps = <&rpmpd_opp_turbo>; + turbo-mode; + }; + }; + }; + remoteproc_mpss: remoteproc@6080000 { compatible = "qcom,shikra-mpss-pas"; reg = <0x0 0x06080000 0x0 0x100>;
--
2.34.1