[PATCH v4 0/3] arm64: dts: freescale: add Free Mobile Nodebox v3 CPU Module (LX2160A)

The Nodebox v3 is a Free Mobile CPU module built around the NXP LX2160A
(16x Cortex-A72, DPAA2).

The same fsl-lx2160a-nbxv3.dtsi shall be used verbatim by the
U-Boot port, sent in parallel to the U-Boot list, so the two trees
cannot drift.

Dependency:

the DTS uses gpio hogs on the QorIQ GPIO controllers, which
needs the commit
  78c0baf85cd0 ("dt-bindings: gpio: fsl,qoriq-gpio: allow gpio-hog child nodes")
already in gpio/for-next and that will likely arrive in v7.4-rc1.
Until it lands, dtbs_check reports the five hog nodes, the rest of the
tree validates clean against the current schemas.

Signed-off-by: Vincent Jardin <vjardin@free.fr>
---
Changes in v4:
- dt-bindings: arm: fsl: commit message like the other ones (Krzysztof Kozlowski)
- Acked-by on the vendor prefix
- Drop U-Boot comments from the DTS commit message (Frank Li)
- Boot NOR reset: reset-gpios on flash@0 instead of a gpio hog (Frank Li)
- ethsw-mdio-en: regulator-fixed instead of a gpio hog (Frank Li)
- ethsw-reset#: hog dropped (Frank Li)
- pltrst#: platform without consumer node
- Link to v3: https://lore.kernel.org/r/20260908-for-upstream-nbxv3-dts-v3-0-1d88b2c11680@free.fr (local)

Changes in v3:
- Drop the thermtrip hog on gpio1 line 23, should have been clean'd
  before
- Link to v2: https://lore.kernel.org/r/20260907-for-upstream-nbxv3-dts-v2-0-6b4afd36180b@free.fr (local)

Changes in v2: (from Sashiko's comments)
- Makefile: dtb entry in alphabetical order (before qds).
- Move the XSPI1_A_DATA[7:4] GPIO mux group from &fspi to &gpio1, so
  the reset hogs on gpio1 do not depend on the fspi probe.
- gpio hogs: describe ethsw-reset# and ethsw-mdio-en with their
  active-low polarity (GPIO_ACTIVE_LOW), same electrical levels.
- Link to v1: https://lore.kernel.org/r/20260907-for-upstream-nbxv3-dts-v1-0-f43fd0028b78@free.fr (local)

---
Vincent Jardin (3):
      dt-bindings: vendor-prefixes: add Free Mobile
      dt-bindings: arm: fsl: add Free Mobile Nodebox v3 CPU Module
      arm64: dts: freescale: add Nodebox v3 CPU Module

 Documentation/devicetree/bindings/arm/fsl.yaml     |   6 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 arch/arm64/boot/dts/freescale/Makefile             |   2 +
 .../arm64/boot/dts/freescale/fsl-lx2160a-nbxv3.dts |  34 +++
 .../boot/dts/freescale/fsl-lx2160a-nbxv3.dtsi      | 321 +++++++++++++++++++++
 5 files changed, 365 insertions(+)
---
base-commit: df2908090cda368b01ff43709f51890076c56157
change-id: 20260907-for-upstream-nbxv3-dts-bbecd04038a2

Best regards,
-- 
Vincent Jardin [off-list ref]