[PATCH v4 12/13] arm64: dts: qcom: ipq5018: Add Super-Speed UNIPHY to USB node

From: George Moussalem <redacted>

Add the USB3 UNIPHY to the USB controller node for USB3 support.
In addition, switch to the pipe clock supplied by the USB3 UNIPHY
instead of the UTMI clock.

Reviewed-by: Konrad Dybcio <redacted>
Tested-by: Stanislaw Pal <redacted>
Signed-off-by: George Moussalem <redacted>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index a6e337e137c8..8e5d45a214a5 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi

@@ -627,10 +627,8 @@ usb: usb@8a00000 {
 
 			resets = <&gcc GCC_USB0_BCR>;
 
-			phys = <&usbphy0>;
-			phy-names = "usb2-phy";
-
-			qcom,select-utmi-as-pipe-clk;
+			phys = <&usbphy0>, <&usbphy1>;
+			phy-names = "usb2-phy", "usb3-phy";
 
 			tx-fifo-resize;
 			snps,is-utmi-l1-suspend;

-- 
2.53.0