[PATCH 0/3] arm64: dts: freescale: add Free Mobile Nodebox v3 CPU Module (LX2160A)

The Nodebox v3 is a Free Mobile CPU module built around the NXP LX2160A
(16x Cortex-A72, DPAA2).

The same fsl-lx2160a-nbxv3.dtsi shall be used verbatim by the
U-Boot port, sent in parallel to the U-Boot list, so the two trees
cannot drift.

XXX Dependency:

the DTS uses gpio hogs on the QorIQ GPIO controllers, which
needs the commit
  78c0baf85cd0 ("dt-bindings: gpio: fsl,qoriq-gpio: allow gpio-hog child nodes")
already in gpio/for-next and that will likely arrive in v7.4-rc1.
Until it lands, dtbs_check reports the five hog nodes, the rest of the
tree validates clean against the current schemas.

Signed-off-by: Vincent Jardin <vjardin@free.fr>
---
Vincent Jardin (3):
      dt-bindings: vendor-prefixes: add Free Mobile
      dt-bindings: arm: fsl: add freemobile,nbxv3 board
      arm64: dts: freescale: add Nodebox v3 CPU Module

 Documentation/devicetree/bindings/arm/fsl.yaml     |   6 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 arch/arm64/boot/dts/freescale/Makefile             |   2 +
 .../arm64/boot/dts/freescale/fsl-lx2160a-nbxv3.dts |  30 ++
 .../boot/dts/freescale/fsl-lx2160a-nbxv3.dtsi      | 342 +++++++++++++++++++++
 5 files changed, 382 insertions(+)
---
base-commit: df2908090cda368b01ff43709f51890076c56157
change-id: 20260907-for-upstream-nbxv3-dts-bbecd04038a2

Best regards,
-- 
Vincent Jardin [off-list ref]