[PATCH 1/2] arm64: tegra: Use consistent key code for force-recovery button
From: Thierry Reding <thierry.reding@kernel.org>
Date: 2026-08-27 14:54:39
Also in:
linux-tegra, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Thierry Reding <redacted> Some boards use the KEY_SLEEP input key code for the force-recovery button, whereas others use BTN_1. The latter isn't valid because it only applies to devices marked CAP_POINTER. Use KEY_SLEEP consistently for all devices. On certain Tegra234 devices there are definitions for a suspend key that uses KEY_SLEEP, but I couldn't find any references to this key in any of the board documents, so remove them. Signed-off-by: Thierry Reding <redacted> --- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 2 +- arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701.dtsi | 9 +-------- arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts | 9 +-------- arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi | 2 +- 4 files changed, 4 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index d78b9bd45df6..6c5f1b4765fc 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts@@ -1750,7 +1750,7 @@ key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; - linux,code = <BTN_1>; + linux,code = <KEY_SLEEP>; debounce-interval = <30>; };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701.dtsi
index 420858a8f4a8..9b990d1cef3f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701.dtsi@@ -391,7 +391,7 @@ key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; - linux,code = <BTN_1>; + linux,code = <KEY_SLEEP>; }; key-power {
@@ -402,13 +402,6 @@ key-power { wakeup-event-action = <EV_ACT_ASSERTED>; wakeup-source; }; - - key-suspend { - label = "Suspend"; - gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_SLEEP>; - }; }; fan: pwm-fan {
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
index 97cede1fcb70..f5fb2d327650 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts@@ -337,7 +337,7 @@ key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; - linux,code = <BTN_1>; + linux,code = <KEY_SLEEP>; }; key-power {
@@ -348,13 +348,6 @@ key-power { wakeup-event-action = <EV_ACT_ASSERTED>; wakeup-source; }; - - key-suspend { - label = "Suspend"; - gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_SLEEP>; - }; }; serial {
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
index 41821354bbda..9b93074e5aed 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi@@ -216,7 +216,7 @@ key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; - linux,code = <BTN_1>; + linux,code = <KEY_SLEEP>; }; key-power {
--
2.55.0