[PATCH v2] arm64: dts: qcom: eliza: Connect USB3 PHY pipe clock to GCC

The GCC USB3 primary PHY pipe clock is sourced by the USB3 pipe output of
the USB/DP QMP PHY. The corresponding GCC clock input was left as an
empty clock specifier when the USB nodes were added.

Connect the QMP PHY USB3 output to GCC so the USB3 PHY pipe clock can
propagate to the USB controller.

Fixes: 88ddafb01ec0 ("arm64: dts: qcom: eliza: Describe the ADSP and USB related nodes")
Reviewed-by: Konrad Dybcio <redacted>
Signed-off-by: Abel Vesa <redacted>
---
Changes in v2:
- Fixed the usage of wrong index. Was using the phy index instead of
  clock one.
- Picked up Konrad's R-b tag.
- Link to v1: https://patch.msgid.link/20260825-dts-qcom-eliza-add-missing-usb-dp-phy-clk-to-gcc-v1-1-f0d3719f798c@oss.qualcomm.com

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konradybcio@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Abel Vesa <redacted>
To: Dmitry Baryshkov <redacted>
Cc: Krzysztof Kozlowski <redacted>
Cc: Konrad Dybcio <redacted>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm64/boot/dts/qcom/eliza.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
index 66ea4aaafd73..45853c11a03c 100644
--- a/arch/arm64/boot/dts/qcom/eliza.dtsi
+++ b/arch/arm64/boot/dts/qcom/eliza.dtsi

@@ -655,7 +655,7 @@ gcc: clock-controller@100000 {
 				 <&ufs_mem_phy 0>,
 				 <&ufs_mem_phy 1>,
 				 <&ufs_mem_phy 2>,
-				 <0>;
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 
 			power-domains = <&rpmhpd RPMHPD_CX>;
 

---
base-commit: 4b18edbd8e70f7e6860d56370f13244896d0f95c
change-id: 20260825-dts-qcom-eliza-add-missing-usb-dp-phy-clk-to-gcc-9602a79db396

Best regards,
--  
Abel Vesa [off-list ref]