[PATCH v2 05/12] phy: phy-mtk-dp: Implement power_on and power_off PHY callbacks

@@ -20,6 +20,9 @@
 
 #define MTK_DP_PHY_MAX_LANES		4
 
+/* DP_PHYA_GLB_FORCE_CTRL_1 */
+#define CKM_CKTX0_EN_FORCE_MODE		BIT(10)
+
 /* DP_PHYD_PLL_CTL_1 */
 #define TPLL_SSC_EN			BIT(3)
 

@@ -37,6 +40,11 @@
 #  define DP_GLB_SW_RST_XTAL_CLK	BIT(2)
 #  define DP_GLB_SW_RST_MAIN_LINK	BIT(3)
 
+/* DP_PHYD_AUX_RX_CTL */
+#define PHYD_DIG_DPAUX_RX_EN		BIT(0)
+#define PHYD_DIG_XTP_GLB_CKDET_EN	BIT(1)
+#define PHYD_DIG_DPAUX_RX_DEGLITCH_EN	BIT(2)
+
 #define XTP_LN_TX_LCTXC0_SW0_PRE0_DEFAULT	BIT(4)
 #define XTP_LN_TX_LCTXC0_SW0_PRE1_DEFAULT	(BIT(10) | BIT(12))
 #define XTP_LN_TX_LCTXC0_SW0_PRE2_DEFAULT	GENMASK(20, 19)

@@ -83,6 +91,12 @@
 #define DRIVING_PARAM_8_DEFAULT	(XTP_LN_TX_LCTXCP1_SW2_PRE1_DEFAULT | \
 				 XTP_LN_TX_LCTXCP1_SW3_PRE0_DEFAULT)
 
+enum mtk_dp_phya_ana_glb_regidx {
+	DP_PHYA_GLB_FORCE_CTRL_0,
+	DP_PHYA_GLB_FORCE_CTRL_1,
+	DP_PHYA_GLOBAL_MAX
+};
+
 enum mtk_dp_phyd_dig_lane_regidx {
 	DP_PHYD_LAN_DRIVING_PARAM_0,
 	DP_PHYD_LAN_MAX

@@ -93,9 +107,15 @@ enum mtk_dp_phyd_dig_glb_regidx {
 	DP_PHYD_PLL_CTL_1,
 	DP_PHYD_SW_RST,
 	DP_PHYD_BIT_RATE,
+	DP_PHYD_AUX_RX_CTL,
 	DP_PHYD_GLOBAL_MAX
 };
 
+static const u8 mt8195_phy_ana_glb_regs[DP_PHYA_GLOBAL_MAX] = {
+	[DP_PHYA_GLB_FORCE_CTRL_0] = 0x30,
+	[DP_PHYA_GLB_FORCE_CTRL_1] = 0x34,
+};
+
 static const u8 mt8195_phy_dig_lane_regs[DP_PHYD_LAN_MAX] = {
 	[DP_PHYD_LAN_DRIVING_PARAM_0] = 0x2c,
 };

@@ -105,21 +125,26 @@ static const u8 mt8195_phy_dig_glb_regs[DP_PHYD_GLOBAL_MAX] = {
 	[DP_PHYD_PLL_CTL_1] = 0x14,
 	[DP_PHYD_SW_RST] = 0x38,
 	[DP_PHYD_BIT_RATE] = 0x3c,
+	[DP_PHYD_AUX_RX_CTL] = 0x40,
 };
 
 /**
  * struct mtk_dp_phy_pdata - Platform data and defaults for MediaTek DP/eDP PHY
+ * @off_ana_glb:    Base offset for dptx_phyd_sifslv_ana_glb
  * @off_dig_glb:    Base offset for dptx_phyd_sifslv_dig_glb
  * @off_dig_lane:   Base offsets for dptx_phyd_sifslv_dig_lan (for each lane)
+ * @regs_ana_glb:   Register (layout) offsets for ana_glb
  * @regs_dig_glb:   Register (layout) offsets for dig_glb
  * @regs_dig_lane:  Register (layout) offsets for dig_lan
  */
 struct mtk_dp_phy_pdata {
 	/* Register offsets */
+	u16 off_ana_glb;
 	u16 off_dig_glb;
 	u16 off_dig_lane[MTK_DP_PHY_MAX_LANES];
 
 	/* Register maps */
+	const u8 *regs_ana_glb;
 	const u8 *regs_dig_glb;
 	const u8 *regs_dig_lane;
 };

@@ -200,6 +225,59 @@ static int mtk_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
 	return 0;
 }
 
+static int mtk_dp_phy_power_on(struct phy *phy)
+{
+	struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy);
+	const struct mtk_dp_phy_pdata *pdata = dp_phy->pdata;
+	const u8 *regs_dig = pdata->regs_dig_glb;
+	const u8 *regs_ana = pdata->regs_ana_glb;
+	int ret;
+
+	/* Enable AUX Channel with RX De-Glitch and input clock detection */
+	ret = regmap_write(dp_phy->regmap,
+			   pdata->off_dig_glb + regs_dig[DP_PHYD_AUX_RX_CTL],
+			   PHYD_DIG_DPAUX_RX_EN |
+			   PHYD_DIG_XTP_GLB_CKDET_EN |
+			   PHYD_DIG_DPAUX_RX_DEGLITCH_EN);
+	if (ret)
+		return ret;
+
+	ret = regmap_clear_bits(dp_phy->regmap,
+				pdata->off_ana_glb + regs_ana[DP_PHYA_GLB_FORCE_CTRL_1],
+				CKM_CKTX0_EN_FORCE_MODE);
+	if (ret) {
+		/* Shut down AUX channel */
+		regmap_write(dp_phy->regmap,
+			     pdata->off_dig_glb + regs_dig[DP_PHYD_AUX_RX_CTL], 0);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int mtk_dp_phy_power_off(struct phy *phy)
+{
+	struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy);
+	const struct mtk_dp_phy_pdata *pdata = dp_phy->pdata;
+	const u8 *regs_dig = pdata->regs_dig_glb;
+	const u8 *regs_ana = pdata->regs_ana_glb;
+	int ret;
+
+	ret = regmap_set_bits(dp_phy->regmap,
+			      pdata->off_ana_glb + regs_ana[DP_PHYA_GLB_FORCE_CTRL_1],
+			      CKM_CKTX0_EN_FORCE_MODE);
+	if (ret)
+		return ret;
+
+	/* Disable RX */
+	ret = regmap_write(dp_phy->regmap,
+			   pdata->off_dig_glb + regs_dig[DP_PHYD_AUX_RX_CTL], 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static int mtk_dp_phy_reset(struct phy *phy)
 {
 	struct mtk_dp_phy *dp_phy = phy_get_drvdata(phy);

@@ -220,6 +298,8 @@ static int mtk_dp_phy_reset(struct phy *phy)
 
 static const struct phy_ops mtk_dp_phy_dev_ops = {
 	.init = mtk_dp_phy_init,
+	.power_on = mtk_dp_phy_power_on,
+	.power_off = mtk_dp_phy_power_off,
 	.configure = mtk_dp_phy_configure,
 	.reset = mtk_dp_phy_reset,
 	.owner = THIS_MODULE,

@@ -319,8 +399,10 @@ static int mtk_dp_phy_probe(struct platform_device *pdev)
 }
 
 static const struct mtk_dp_phy_pdata mt8195_dp_phy_data = {
+	.off_ana_glb = 0x0,
 	.off_dig_glb = 0x1000,
 	.off_dig_lane = (const u16[]) { 0x1100, 0x1200, 0x1300, 0x1400 },
+	.regs_ana_glb = mt8195_phy_ana_glb_regs,
 	.regs_dig_glb = mt8195_phy_dig_glb_regs,
 	.regs_dig_lane = mt8195_phy_dig_lane_regs,
 };