[PATCH 5/7] arm64: dts: qcom: sm6125-xiaomi-ginkgo: Add IR transmitter
From: Biswapriyo Nath <hidden>
Date: 2026-03-25 18:08:06
Also in:
linux-arm-msm, linux-clk, linux-leds, lkml, phone-devel
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
The IR transmitting LED is connected to SPI8 controller. Signed-off-by: Biswapriyo Nath <redacted> --- .../boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi
index f66ff5f7693..7d848117317 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi@@ -99,6 +99,10 @@ key-volume-up { }; }; +&gpi_dma1 { + status = "okay"; +}; + &pm6125_gpios { vol_up_n: vol-up-n-state { pins = "gpio5";
@@ -160,6 +164,10 @@ &qupv3_id_0 { status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators";
@@ -332,6 +340,18 @@ &sdhc_2 { status = "okay"; }; +&spi8 { + status = "okay"; + + irled@1 { + compatible = "ir-spi-led"; + reg = <1>; + + duty-cycle = /bits/ 8 <30>; + spi-max-frequency = <1000000>; + }; +}; + &tlmm { gpio-reserved-ranges = <0 4>, <30 4>; };
--
2.53.0