Parvathi Pudi [off-list ref] writes:

From: Roger Quadros <redacted>

The TI Sitara AM335x ICE-V2 consists of single PRU-ICSS instance,
This patch adds the new device tree overlay file in-order to enable
PRU-ICSS instance, along with makefile changes.

PRU-ICSS instance consists of two PRU cores along with various
peripherals such as the Interrupt Controller (PRU_INTC), the Industrial
Ethernet Peripheral(IEP), the Real Time Media Independent Interface
controller (MII_RT), and the Enhanced Capture (eCAP) event module.

am33xx-l4.dtsi - Adds IEP and eCAP peripheral as child nodes
of the PRUSS subsystem node.

am335x-icev2-prueth.dtso - Adds PRU-ICSS instance node along with PRU
eth port information and corresponding port configuration. It includes
interrupt mapping for packet reception, HW timestamp collection, and PRU
Ethernet ports in MII mode,

GPIO configuration, boot strapping along with delay configuration for
individual PRU Ethernet port and other required nodes.

Signed-off-by: Roger Quadros <redacted>
Signed-off-by: Andrew F. Davis <redacted>
Signed-off-by: Murali Karicheri <redacted>
Signed-off-by: Basharath Hussain Khaja <redacted>
Signed-off-by: Parvathi Pudi <parvathi@couthit.com>

[...]

+/*
+ * Disable CPSW switch node and
+ * MDIO configuration to prevent
+ * conflict with PRU-ICSS
+ */
+&mac_sw {
+        status = "disable";
+};
+
+&davinci_mdio_sw {
+        status = "disable";
+};

I think you need s/disable/disabled/?  (note the trailing 'd').  Without
that, I don't think you're disabling these nodes, so I'm curious how it
is not conflicting with the PRU-ICSS.

Kevin