From: Dennis Gilmore <redacted>

This series adds initial support for Orange Pi 5 Pro. The network
driver was just added. The only thing missing is the second HDMI port
that is connected via a DP to HDMI adaptor


The series was tested against Linux 7.0-rc2

Please take a look.

Thank you,

Dennis Gilmore

Changes in v3:
- moved leds from gpio-leds to pwm-leds
- remove disable-wp from sdio
- rename vcc3v3_pcie_eth regulator to vcc3v3_pcie_m2 to reflect the
  purppose
- actually clean up the delete lines and comments missed in v2
- link to v2 https://lore.kernel.org/linux-devicetree/20260304025521.210377-1-dennis@ausil.us/ (local)

Changes in v2:
- moved items not shared by orangepi 5/5b/5 Pro from dtsi to 5 and 5b
  dts files
- removed all the comments and deleted properties from 5 Pro dts
- Link to v1 https://lore.kernel.org/linux-devicetree/20260228205418.2944620-1-dennis@ausil.us/ (local)

Dennis Gilmore (3):
  dt-bindings: arm: rockchip: Add Orange Pi 5 Pro
  arm64: dts: rockchip: refactor items from Orange Pi 5/b to prep for
    Pro
  arm64: dts: rockchip: Add Orange Pi 5 Pro board support

 .../devicetree/bindings/arm/rockchip.yaml     |   1 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3588s-orangepi-5-pro.dts   | 311 ++++++++++++++++++
 .../boot/dts/rockchip/rk3588s-orangepi-5.dts  | 184 +++++++++++
 .../boot/dts/rockchip/rk3588s-orangepi-5.dtsi | 202 +-----------
 .../boot/dts/rockchip/rk3588s-orangepi-5b.dts | 181 ++++++++++
 6 files changed, 691 insertions(+), 189 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts

-- 
2.53.0