Thread (7 messages) read the whole thread 7 messages, 2 authors, 2026-02-20
STALE161d

Revision v4 of 8 in this series.

Revisions (8)
  1. v1 [diff vs current]
  2. v1 [diff vs current]
  3. v2 [diff vs current]
  4. v3 [diff vs current]
  5. v4 current
  6. v5 [diff vs current]
  7. v6 [diff vs current]
  8. v7 [diff vs current]

[PATCH v4 1/3] dt-bindings: hwlock: Adding brcmstb-hwspinlock support

From: Kamal Dasu <kamal.dasu@broadcom.com>
Date: 2026-02-19 21:57:15
Also in: linux-arm-kernel, linux-remoteproc, lkml
Subsystem: hardware spinlock core, open firmware and flattened device tree bindings, the rest · Maintainers: Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

The Broadcom settop SoCs have hardware semaphores as part of the
"sundry" IP block which has other controls that do not belong anywhere
else e.g. pin/mux controls, SoC identification, drive strength, reset
controls, and other misc bits are part of this block.

Adding brcmstb hwspinlock bindings which allows hwlock driver
to iomap 16 hardware semaphore registers that are part of all
settop SoCs. The bindings use the common
"brcm,brcmstb-sun-top-ctrl-semaphore" compatible string reflecting the
actual hardware register block name.

Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
---
 .../hwlock/brcm,brcmstb-hwspinlock.yaml       | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwlock/brcm,brcmstb-hwspinlock.yaml
diff --git a/Documentation/devicetree/bindings/hwlock/brcm,brcmstb-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/brcm,brcmstb-hwspinlock.yaml
new file mode 100644
index 000000000000..0a9a1bf19fe2
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/brcm,brcmstb-hwspinlock.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/brcm,brcmstb-hwspinlock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Settop Sundry Block Hardware Semaphore
+
+description:
+  Broadcom settop SoCs contain 16 hardware semaphore registers
+  (SEMAPHORE_0 through SEMAPHORE_15) that provide hardware-arbitrated
+  mutual exclusion between drivers running on the SoC.
+
+  The semaphore registers belong to the sundry hardware block. The
+  node describes the semaphore register range carved out of the larger
+  sundry block address space.
+
+maintainers:
+  - Kamal Dasu <kamal.dasu@broadcom.com>
+
+properties:
+  compatible:
+    const: brcm,brcmstb-sun-top-ctrl-semaphore
+
+  "#hwlock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#hwlock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    hwlock@8404038 {
+        compatible = "brcm,brcmstb-sun-top-ctrl-semaphore";
+        reg = <0x8404038 0x40>;
+        #hwlock-cells = <1>;
+    };
+
-- 
2.34.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help