@@ -1,36 +0,0 @@
-ST USB OHCI controller
-
-Required properties:
-
- - compatible		: must be "st,st-ohci-300x"
- - reg			: physical base addresses of the controller and length of memory mapped
-			  region
- - interrupts		: one OHCI controller interrupt should be described here
- - clocks		: phandle list of usb clocks
- - clock-names		: should be "ic" for interconnect clock and "clk48"
-See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-
- - phys			: phandle for the PHY device
- - phy-names		: should be "usb"
-
- - resets		: phandle to the powerdown and reset controller for the USB IP
- - reset-names		: should be "power" and "softreset".
-See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
-See: Documentation/devicetree/bindings/reset/reset.txt
-
-Example:
-
-	ohci0: usb@fe1ffc00 {
-		compatible = "st,st-ohci-300x";
-		reg = <0xfe1ffc00 0x100>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
-		clocks = <&clk_s_a1_ls 0>,
-			 <&clockgen_b0 0>;
-		clock-names = "ic", "clk48";
-		phys = <&usb2_phy>;
-		phy-names = "usb";
-
-		resets = <&powerdown STIH416_USB0_POWERDOWN>,
-			 <&softreset STIH416_USB0_SOFTRESET>;
-		reset-names = "power", "softreset";
-	};

@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/st,st-ohci-300x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics USB OHCI Controller
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description:
+  The STMicroelectronics USB Open Host Controller Interface (OHCI)
+  compliant USB host controller found in ST platforms. The controller
+  provides full- and low-speed USB host functionality and interfaces
+  with an external USB PHY. It requires dedicated clock, reset, and
+  interrupt resources for proper operation.
+
+allOf:
+  - $ref: /schemas/usb/usb.yaml#
+
+properties:
+  compatible:
+    const: st,st-ohci-300x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ic
+      - const: clk48
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: usb
+
+  resets:
+    minItems: 2
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: power
+      - const: softreset
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stih407-resets.h>
+    usb@fe1ffc00 {
+        compatible = "st,st-ohci-300x";
+        reg = <0xfe1ffc00 0x100>;
+        interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
+        clocks = <&clk_s_a1_ls 0>,
+                 <&clockgen_b0 0>;
+        clock-names = "ic", "clk48";
+        phys = <&usb2_phy>;
+        phy-names = "usb";
+        resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+                 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+        reset-names = "power", "softreset";
+    };
+...