[PATCH v1 0/2] watchdog: npcm: Add reset status detection support

This series adds reset status detection support to the NPCM watchdog
driver for both NPCM7XX (Poleg) and NPCM8XX (Arbel) platforms.

Patch 1 updates the device-tree bindings to support reset status
detection on NPCM750 and NPCM8XX platforms. It introduces the
`nuvoton,card-reset-type`, `nuvoton,ext1-reset-type`, and
`nuvoton,ext2-reset-type` properties, and integrates the syscon
interface required for accessing the reset status registers.

Patch 2 implements the watchdog driver changes, including the reset
status detection infrastructure and platform restart support for both
NPCM7XX and NPCM8XX.

Tomer Maimon (2):
  dt-bindings: watchdog: Add NPCM reset status support
  watchdog: npcm: Add reset status support

 .../watchdog/nuvoton,npcm750-wdt.yaml         |  51 +++++++-
 drivers/watchdog/npcm_wdt.c                   | 110 ++++++++++++++++++
 2 files changed, 159 insertions(+), 2 deletions(-)

-- 
2.34.1