Re: [PATCH v3 3/9] pci: pwrctrl: rename pci-pwrctrl-slot as generic
From: Manivannan Sadhasivam <mani@kernel.org>
Date: 2026-02-09 11:31:58
Also in:
linux-arm-msm, linux-pci, linux-renesas-soc, linux-usb, lkml
On Fri, Feb 06, 2026 at 03:50:31PM +0100, Neil Armstrong wrote:
quoted hunk ↗ jump to hunk
The driver is pretty generic and would fit for either PCI Slots or PCI devices connected to PCI ports, so rename the driver and module as pci-pwrctrl-generic. Suggested-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- drivers/pci/pwrctrl/Kconfig | 8 ++++---- drivers/pci/pwrctrl/Makefile | 4 ++-- drivers/pci/pwrctrl/{slot.c => generic.c} | 0 3 files changed, 6 insertions(+), 6 deletions(-)diff --git a/drivers/pci/pwrctrl/Kconfig b/drivers/pci/pwrctrl/Kconfig index e0f999f299bb..0a93ac4cd11b 100644 --- a/drivers/pci/pwrctrl/Kconfig +++ b/drivers/pci/pwrctrl/Kconfig@@ -11,12 +11,12 @@ config PCI_PWRCTRL_PWRSEQ select POWER_SEQUENCING select PCI_PWRCTRL -config PCI_PWRCTRL_SLOT - tristate "PCI Power Control driver for PCI slots" +config PCI_PWRCTRL_GENERIC + tristate "Generic PCI Power Control driver for PCI slots"
s/slots/slots and endpoints
select PCI_PWRCTRL help - Say Y here to enable the PCI Power Control driver to control the power - state of PCI slots. + Say Y here to enable the generic PCI Power Control driver to control + the power state of PCI slots.
s/slots/slots and endpoints. - Mani -- மணிவண்ணன் சதாசிவம்