Re: [PATCH v8 7/8] iio: adc: ad4030: Add support for ADAQ4216 and ADAQ4224

On Fri, Feb 06, 2026 at 04:02:19PM -0300, Marcelo Schmitt wrote:

ADAQ4216 and ADAQ4224 are similar to AD4030, but feature a PGA circuitry
that scales the analog input signal prior to it reaching the ADC. The PGA
is controlled through a pair of pins (A0 and A1) whose state define the
gain that is applied to the input signal.

Add support for ADAQ4216 and ADAQ4224. Provide a list of PGA options
through the IIO device channel scale available interface and enable control
of the PGA through the channel scale interface.

...

+/*
+ * Gains computed as fractions of 1000 so they can be expressed by integers.
+ */
+static const int adaq4216_hw_gains_vpv[] = {
+	1 * MILLI / 3,		/* 333 */
+	5 * MILLI / 9,		/* 555 */
+	20 * MILLI / 9,		/* 2222 */
+	20 * MILLI / 3,		/* 6666 */

In case you would need a new version, or Jonathan is okay to tweak, I think
it's better to use float in the comments. The above comment explains the
MILL multiplier for the values.

	1 * MILLI / 3,		/* 0.333 */
	5 * MILLI / 9,		/* 0.555 */
	20 * MILLI / 9,		/* 0.2222 */
	20 * MILLI / 3,		/* 0.6666 */

+};

Btw, if this true (if I am not mistaken in the gain values), the question is
why 0.2222 is much higher than 0.555.

-- 
With Best Regards,
Andy Shevchenko