[PATCH] dt-bindings: power: ti,omap3-smartreflex-core: convert to DT schema

@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/ti,omap3-smartreflex-core.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments SmartReflex module
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  Texas Instruments SmartReflex is an on-chip adaptive power management
+  technology integrated into TI's OMAP and other SoCs. It dynamically
+  adjusts voltage and frequency for different chip domains in real time
+  to compensate for process, voltage, and temperature (PVT) variations.
+  Dedicated hardware sensors and control logic continuously monitor
+  conditions and apply the lowest safe voltage for the required performance
+  level.
+
+properties:
+  compatible:
+    enum:
+      - ti,omap3-smartreflex-core
+      - ti,omap3-smartreflex-mpu-iva
+      - ti,omap4-smartreflex-core
+      - ti,omap4-smartreflex-mpu
+      - ti,omap4-smartreflex-iva
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+    description:
+      It was required by the OMAP interconnect/PRCM code to automatically
+      initialize hardware modules using TI's internal database.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    smartreflex@4a0db000 {
+        compatible = "ti,omap4-smartreflex-iva";
+        reg = <0x4a0db000 0x80>;
+        interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+        ti,hwmods = "smartreflex_iva";
+    };
+
+  - |
+    smartreflex@4a0dd000 {
+        compatible = "ti,omap4-smartreflex-core";
+        reg = <0x4a0dd000 0x80>;
+        interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+        ti,hwmods = "smartreflex_core";
+    };
+
+  - |
+    smartreflex@4a0d9000 {
+        compatible = "ti,omap4-smartreflex-mpu";
+        reg = <0x4a0d9000 0x80>;
+        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+        ti,hwmods = "smartreflex_mpu";
+    };
+...

@@ -1,47 +0,0 @@
-Texas Instruments SmartReflex binding
-
-SmartReflex is used to set and adjust the SoC operating points.
-
-
-Required properties:
-
-compatible: Shall be one of the following:
-	    "ti,omap3-smartreflex-core"
-	    "ti,omap3-smartreflex-mpu-iva"
-	    "ti,omap4-smartreflex-core"
-	    "ti,omap4-smartreflex-mpu"
-	    "ti,omap4-smartreflex-iva"
-
-reg: Shall contain the device instance IO range
-
-interrupts: Shall contain the device instance interrupt
-
-
-Optional properties:
-
-ti,hwmods: Shall contain the TI interconnect module name if needed
-	   by the SoC
-
-
-Example:
-
-	smartreflex_iva: smartreflex@4a0db000 {
-		compatible = "ti,omap4-smartreflex-iva";
-		reg = <0x4a0db000 0x80>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		ti,hwmods = "smartreflex_iva";
-	};
-
-	smartreflex_core: smartreflex@4a0dd000 {
-		compatible = "ti,omap4-smartreflex-core";
-		reg = <0x4a0dd000 0x80>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		ti,hwmods = "smartreflex_core";
-	};
-
-	smartreflex_mpu: smartreflex@4a0d9000 {
-		compatible = "ti,omap4-smartreflex-mpu";
-		reg = <0x4a0d9000 0x80>;
-		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-		ti,hwmods = "smartreflex_mpu";
-	};