[PATCH 8/9] arm64: dts: qcom: kodiak: Align EUD node with binding
From: Elson Serrao <hidden>
Date: 2026-01-16 23:21:15
Also in:
linux-arm-msm, linux-usb, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
The EUD node does not match the current binding and maps USB endpoints to the secondary controller. This SoC supports EUD only on the primary High-Speed USB path. The binding also requires a per-path PHY reference. Model the primary UTMI path as a child node with the required PHY and an empty ports graph. Leave endpoint mapping to board DTS files, and remove the secondary mapping and associated ports so the description conforms to the binding. Signed-off-by: Elson Serrao <redacted> --- arch/arm64/boot/dts/qcom/kodiak.dtsi | 33 +++++++++++++++++----------- 1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
index c2ccbb67f800..35c47a6b03f7 100644
--- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
+++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi@@ -4284,12 +4284,6 @@ usb_2: usb@8c00000 { phy-names = "usb2-phy"; maximum-speed = "high-speed"; usb-role-switch; - - port { - usb2_role_switch: endpoint { - remote-endpoint = <&eud_ep>; - }; - }; }; qspi: spi@88dc000 {
@@ -4610,16 +4604,29 @@ eud: eud@88e0000 { <0 0x88e2000 0 0x1000>; interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; - ports { - #address-cells = <1>; - #size-cells = <0>; + eud0: eud-path@0 { + reg = <0>; + phys = <&usb_1_hsphy>; - port@0 { - reg = <0>; - eud_ep: endpoint { - remote-endpoint = <&usb2_role_switch>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + eud_usb0: endpoint { + }; + }; + + port@1 { + reg = <1>; + eud_con0: endpoint { + }; }; }; };
--
2.34.1