Device nodes are enabled by default and this DTSI file does not include
anything else, thus it is impossible that nodes were disabled before and
need to be re-enabled.  Adding redundant status=okay is just confusing
and suggests some other code flow.  Verified with dtx_diff.

Signed-off-by: Krzysztof Kozlowski <redacted>

---

make dtbs, copy old and new and then:

for i in dts-old/*/*dtb dts-old/*/*/*dtb; do echo $i; scripts/dtc/dtx_diff ${i} dts-new/${i#dts-old/} ; done | grep -E '^\+'
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index b00630451909..705af0373a09 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi

@@ -120,7 +120,6 @@ gpcdma: dma-controller@2600000 {
 		iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
 		dma-coherent;
 		dma-channel-mask = <0xfffffffe>;
-		status = "okay";
 	};
 
 	aconnect@2900000 {

@@ -608,7 +607,6 @@ timer@3010000 {
 			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		status = "okay";
 	};
 
 	uarta: serial@3100000 {

-- 
2.51.0