[PATCH v3 3/4] dt-bindings: mux: gpio-mux: add adi,adg2404 support
From: Antoniu Miclaus <antoniu.miclaus@analog.com>
Date: 2026-01-15 12:33:46
Also in:
lkml
Subsystem:
multiplexer subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Peter Rosin, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add adi,adg2404 as a compatible string. The ADG2404 is a 4:1 analog multiplexer that uses the enable-gpios feature. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> --- changes in v3: * integrate with gpio-mux bindings instead of separate adi,adg2404.yaml --- .../devicetree/bindings/mux/gpio-mux.yaml | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.yaml b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
index 199792d42323..f5866b9f46dd 100644
--- a/Documentation/devicetree/bindings/mux/gpio-mux.yaml
+++ b/Documentation/devicetree/bindings/mux/gpio-mux.yaml@@ -19,7 +19,9 @@ description: |+ properties: compatible: - const: gpio-mux + enum: + - gpio-mux + - adi,adg2404 mux-gpios: description:
@@ -107,4 +109,19 @@ examples: }; }; }; + + - | + /* ADG2404 4:1 multiplexer with enable GPIO */ + #include <dt-bindings/gpio/gpio.h> + + mux-controller { + compatible = "adi,adg2404"; + #mux-control-cells = <0>; + + mux-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>, + <&gpio 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + + idle-state = <0>; /* Select channel S1 when idle */ + }; ...
--
2.43.0