Right above writing the register value back based on 'div' value, there
is the following check:

    if (div > CQSPI_REG_CONFIG_BAUD_MASK)
            div = CQSPI_REG_CONFIG_BAUD_MASK;

which means div does not need to be AND'ed against the bitfield mask.

Remove this redundant operation.

Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
---
 drivers/spi/spi-cadence-quadspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 8eb80b4b76eb..06f6c5979229 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c

@@ -1258,7 +1258,7 @@ static void cqspi_config_baudrate_div(struct cqspi_st *cqspi)
 
 	reg = readl(reg_base + CQSPI_REG_CONFIG);
 	reg &= ~(CQSPI_REG_CONFIG_BAUD_MASK << CQSPI_REG_CONFIG_BAUD_LSB);
-	reg |= (div & CQSPI_REG_CONFIG_BAUD_MASK) << CQSPI_REG_CONFIG_BAUD_LSB;
+	reg |= div << CQSPI_REG_CONFIG_BAUD_LSB;
 	writel(reg, reg_base + CQSPI_REG_CONFIG);
 }
 

-- 
2.51.1