Thread (66 messages) 66 messages, 4 authors, 2026-01-23

Re: [PATCH 21/22] arm64: dts: renesas: r9a09g047: Add DU{0,1} and DSI nodes

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2026-01-14 15:31:03
Also in: dri-devel, linux-clk, linux-renesas-soc, lkml

Hi Tommaso,

On Wed, 26 Nov 2025 at 15:11, Tommaso Merciai
[off-list ref] wrote:
Add DU0, DU1, DSI nodes to RZ/RZG3E SoC DTSI.

Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Thanks for your patch!
quoted hunk ↗ jump to hunk
--- a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
+
+               du0: du0@16460000 {
display@
+                       compatible = "renesas,r9a09g047-du0";
I doubt this compatible value will survive review...
+                       reg = <0 0x16460000 0 0x10000>;
+                       interrupts = <GIC_SPI 882 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&cpg CPG_MOD 0xed>,
+                                <&cpg CPG_MOD 0xee>,
+                                <&cpg CPG_MOD 0xef>;
+                       clock-names = "aclk", "pclk", "vclk";
+                       power-domains = <&cpg>;
+                       resets = <&cpg 0xdc>;
+                       renesas,vsps = <&vspd0 0>;
+                       status = "disabled";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+                                       du0_out_dsi0: endpoint {
+                                       };
+                               };
+
+                               port@1 {
+                                       reg = <1>;
+                                       du0_out_lvds0: endpoint {
+                                       };
+                               };
+
+                               port@2 {
+                                       reg = <2>;
+                                       du0_out_lvds1: endpoint {
+                                       };
+                               };
+                       };
+               };
+
+               du1: du1@16490000 {
display@
+                       compatible = "renesas,r9a09g047-du1";
I doubt this compatible value will survive review...
+                       reg = <0 0x16490000 0 0x10000>;
+                       interrupts = <GIC_SPI 922 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&cpg CPG_MOD 0x1a8>,
+                                <&cpg CPG_MOD 0x1a9>,
+                                <&cpg CPG_MOD 0x1aa>;
+                       clock-names = "aclk", "pclk", "vclk";
+                       power-domains = <&cpg>;
+                       resets = <&cpg 0x11e>;
+                       renesas,vsps = <&vspd1 0>;
+                       status = "disabled";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+                                       du1_out_dsi0: endpoint {
+                                       };
+                               };
+
+                               port@1 {
+                                       reg = <1>;
+                                       du1_out_lvds0: endpoint {
+                                       };
+                               };
+
+                               port@2 {
+                                       reg = <2>;
I expect this will become "port@3" and "reg = <3>" with a unified compatible
value?
+                                       du1_out_rgb0: endpoint {
+                                       };
+                               };
+
+                       };
+               };
+
                fcpvd0: fcp@16470000 {
                        compatible = "renesas,r9a09g047-fcpvd",
                                     "renesas,fcpv";
The rest LGTM.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help