The clk_cmn_pll_recalc_rate() function must account for the reference clock
divider programmed in CMN_PLL_REFCLK_CONFIG. Without this fix, platforms
with a reference divider other than 1 calculate incorrect CMN PLL rates.
For example, on IPQ5332 where the reference divider is 2, the computed rate
becomes twice the actual output.

Read CMN_PLL_REFCLK_DIV and divide the parent rate by this value before
applying the 2 * FACTOR scaling. This yields the correct rate calculation:
rate = (parent_rate / ref_div) * 2 * factor.

Maintain backward compatibility with earlier platforms (e.g. IPQ9574,
IPQ5424, IPQ5018) that use ref_div = 1.

Fixes: f81715a4c87c ("clk: qcom: Add CMN PLL clock controller driver for IPQ SoC")
Signed-off-by: Luo Jie <jie.luo@oss.qualcomm.com>
---
 drivers/clk/qcom/ipq-cmn-pll.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/ipq-cmn-pll.c b/drivers/clk/qcom/ipq-cmn-pll.c
index dafbf5732048..369798d1ce42 100644
--- a/drivers/clk/qcom/ipq-cmn-pll.c
+++ b/drivers/clk/qcom/ipq-cmn-pll.c

@@ -185,7 +185,7 @@ static unsigned long clk_cmn_pll_recalc_rate(struct clk_hw *hw,
 					     unsigned long parent_rate)
 {
 	struct clk_cmn_pll *cmn_pll = to_clk_cmn_pll(hw);
-	u32 val, factor;
+	u32 val, factor, ref_div;
 
 	/*
 	 * The value of CMN_PLL_DIVIDER_CTRL_FACTOR is automatically adjusted

@@ -193,8 +193,15 @@ static unsigned long clk_cmn_pll_recalc_rate(struct clk_hw *hw,
 	 */
 	regmap_read(cmn_pll->regmap, CMN_PLL_DIVIDER_CTRL, &val);
 	factor = FIELD_GET(CMN_PLL_DIVIDER_CTRL_FACTOR, val);
+	if (WARN_ON(factor == 0))
+		factor = 1;
 
-	return parent_rate * 2 * factor;
+	regmap_read(cmn_pll->regmap, CMN_PLL_REFCLK_CONFIG, &val);
+	ref_div = FIELD_GET(CMN_PLL_REFCLK_DIV, val);
+	if (WARN_ON(ref_div == 0))
+		ref_div = 1;
+
+	return div_u64((u64)parent_rate * 2 * factor, ref_div);
 }
 
 static int clk_cmn_pll_determine_rate(struct clk_hw *hw,

-- 
2.43.0