[PATCH v4 2/9] dt-bindings: memory: tegra210: emc: Document OPP table and interconnect

From
Aaron Kling via B4 Relay <devnull+webgeek1234.gmail.com@kernel.org>
Date
2025-09-23 17:05:34
Also in
b4-sent, linux-pm, linux-tegra, lkml
Reply to
Aaron Kling via B4 Relay, 2025-09-23
From: Aaron Kling <redacted>

These are needed for dynamic frequency scaling of the EMC controller.

Signed-off-by: Aaron Kling <redacted>
---
 .../bindings/memory-controllers/nvidia,tegra210-emc.yaml      | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
index bc8477e7ab193b7880bb681037985f3fccebf02f..4e4fb4acd7f9d376379a19b5f8e0256baaed5697 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
@@ -33,6 +33,9 @@ properties:
     items:
       - description: EMC general interrupt
 
+  "#interconnect-cells":
+    const: 0
+
   memory-region:
     maxItems: 1
     description:
@@ -44,6 +47,11 @@ properties:
     description:
       phandle of the memory controller node
 
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC speedo ID mask.
+
 required:
   - compatible
   - reg
@@ -79,4 +87,7 @@ examples:
         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
         memory-region = <&emc_table>;
         nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+
+        #interconnect-cells = <0>;
     };
-- 
2.51.0

Thread (11 messages) 11 messages, 2 authors, last reply 2025-10-13
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help