Re: [PATCH net-next v12 4/5] riscv: dts: spacemit: Add Ethernet support for BPI-F3
From: Vivian Wang <hidden>
Date: 2025-09-14 04:31:46
Also in:
linux-riscv, lkml, netdev, spacemit
On 9/14/25 12:23, Vivian Wang wrote:
quoted hunk ↗ jump to hunk
Banana Pi BPI-F3 uses an RGMII PHY for each port and uses GPIO for PHY reset. Tested-by: Hendrik Hamerlinck <redacted> Signed-off-by: Vivian Wang <redacted> Reviewed-by: Yixun Lan <redacted> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 48 +++++++++++++++++++++++++ 1 file changed, 48 insertions(+)diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts index fe22c747c5012fe56d42ac8a7efdbbdb694f31b6..33e223cefd4bd3a12fae176ac6cddd8276cb53dc 100644 --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts@@ -11,6 +11,8 @@ / { compatible = "bananapi,bpi-f3", "spacemit,k1"; aliases { + ethernet0 = ð0; + ethernet1 = ð1;
Hi Andrew, I added these two aliases in v12, but kept your Reviewed-by for v11 because this is fairly trivial. Same for patch 5. Is this okay? Thanks, Vivian "dramforever" Wang