Hi Ryan,

And AST2600 i2c controller have two register mode, one is legacy
register layout which is mix controller/target register control
together, another is new mode which is separate controller/target
register control.

OK, but the ast2400 and ast2500 I2C peripherals - which this binding
also describes - do not have that facility. Given the 2600 is a distinct
peripheral (as discussed on the v16 series), this would seem to warrant
a distinct binding.

Should this be split out into an ast2600-specific binding, to reflect
that it is different hardware? The reference to the global registers and
transfer modes would then be added only to the ast2600-i2c-bus binding.

Cheers,


Jeremy