OmniVision OG0VE1B is a monochrome image sensor, which produces frames
in 8/10-bit raw output format and supports 640x480, 400x400, 200x200
and 100x100 output image resolution modes.

At the moment the only supported resolution in the device driver is
640x480@120fps (Y8).

The driver version is based on top of media/master, which contains
a new devm_v4l2_sensor_clk_get() helper function.

Output of v4l2-compliance tool from v4l-utils-1.20.0:

----8<----
v4l2-compliance SHA: not available, 64 bits, 64-bit time_t

Compliance test for device /dev/v4l-subdev30:

Required ioctls:

Allow for multiple opens:
	test second /dev/v4l-subdev28 open: OK
	test for unlimited opens: OK
	test invalid ioctls: OK

Debug ioctls:
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
	test VIDIOC_QUERYCTRL: OK
	test VIDIOC_G/S_CTRL: OK
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 10 Private Controls: 0

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK (Not Supported)
	test VIDIOC_TRY_FMT: OK (Not Supported)
	test VIDIOC_S_FMT: OK (Not Supported)
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK (Not Supported)

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
	test VIDIOC_EXPBUF: OK (Not Supported)
	test Requests: OK (Not Supported)

Total for device /dev/v4l-subdev30: 41, Succeeded: 41, Failed: 0, Warnings: 0
----8<----

Link to v1 of the OG0VE1B camera sensor device driver:
- https://lore.kernel.org/all/20250820224646.130270-1-vladimir.zapolskiy@linaro.org/ (local)

Changes from v1 to v2:
* added Reviewed-by: tag to the device tree binding part (Rob),
* removed unnecessary explicit setting of og0ve1b->sd.dev (Tarang),
* switched to regulator bulk operations (Sakari comment for ov6211),
* minor non-function changes.

Vladimir Zapolskiy (2):
  dt-bindings: media: i2c: Add OmniVision OG0VE1B camera sensor
  media: i2c: Add OmniVision OG0VE1B camera sensor

 .../bindings/media/i2c/ovti,og0ve1b.yaml      |  97 +++
 MAINTAINERS                                   |   8 +
 drivers/media/i2c/Kconfig                     |  10 +
 drivers/media/i2c/Makefile                    |   1 +
 drivers/media/i2c/og0ve1b.c                   | 816 ++++++++++++++++++
 5 files changed, 932 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,og0ve1b.yaml
 create mode 100644 drivers/media/i2c/og0ve1b.c

-- 
2.49.0