Re: (subset) [PATCH v4 0/6] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode
From: Vinod Koul <vkoul@kernel.org>
Date: 2025-08-20 17:03:08
Also in:
linux-arm-msm, linux-phy, lkml
On Thu, 07 Aug 2025 18:33:18 +0200, Konrad Dybcio wrote:
Register a typec mux in order to change the PHY mode on the Type-C mux events depending on the mode and the svid when in Altmode setup. The DisplayPort phy should be left enabled if is still powered on by the DRM DisplayPort controller, so bail out until the DisplayPort PHY is not powered off. [...]
Applied, thanks!
[1/6] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch
commit: 3bad7fe22796a420c6e16b591c37ed1bd6cc2a30
[2/6] phy: qcom: qmp-combo: Rename 'mode' to 'phy_mode'
commit: 5daf1bbc73e249075373e030e7221f46c175e04b
[3/6] phy: qcom: qmp-combo: store DP phy power state
commit: 86390472554b2e8fb4cba16a139cade94be58f72
[4/6] phy: qcom: qmp-combo: introduce QMPPHY_MODE
commit: dd331112c0adaebbc8fc767fc805da4a641576db
[5/6] phy: qcom: qmp-combo: register a typec mux to change the QMPPHY_MODE
commit: 896277138c1344cf9f5c415298f048ee29da274d
Best regards,
--
~Vinod