[PATCH 10/15] ARM: dts: ls1021a: remove big-endian for mmc modes
From: Frank Li <Frank.Li@nxp.com>
Date: 2025-08-18 20:48:52
Also in:
imx, linux-arm-kernel, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, arm/freescale layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Remove undocumented big-endian, there are already define little-endian at
binding doc.
Fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/ls/ls1021a-iot.dtb: esdhc@1560000 (fsl,ls1021a-esdhc): Unevaluated properties are not allowed ('big-endian', 'bus-width', 'compatible' were unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm/boot/dts/nxp/ls/ls1021a.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index e16f7f2e3878372f3e622c57705cdbe9f5c7d15b..444fa5e2d42cc8f0ad81efded818b4420683622b 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi@@ -161,7 +161,6 @@ esdhc: mmc@1560000 { clock-frequency = <0>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; - big-endian; bus-width = <4>; status = "disabled"; };
--
2.34.1