Re: [PATCH 3/3] arm64: dts: amlogic: c3: Add tempsensor controller node
From: Neil Armstrong <neil.armstrong@linaro.org>
Date: 2025-07-22 10:05:19
Also in:
linux-amlogic, linux-arm-kernel, linux-pm, lkml
On 18/07/2025 08:37, Xianwei Zhao via B4 Relay wrote:
quoted hunk ↗ jump to hunk
From: Xianwei Zhao <xianwei.zhao@amlogic.com> Add the Tempsensor controller node for C3 SoC family. Signed-off-by: Liming Xue <redacted> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> --- arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index cb9ea3ca6ee0..c853390eca6c 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi@@ -727,6 +727,17 @@ clkc_pll: clock-controller@8000 { "fix"; }; + temperature-sensor@20000 { + compatible = "amlogic,c3-cpu-thermal"; + reg = <0x0 0x20000 0x0 0x50>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_TS>; + assigned-clocks = <&clkc_periphs CLKID_TS>; + assigned-clock-rates = <500000>; + amlogic,ao-secure = <&sec_ao>; + #thermal-sensor-cells = <0>; + }; + eth_phy: mdio-multiplexer@28000 { compatible = "amlogic,g12a-mdio-mux"; reg = <0x0 0x28000 0x0 0xa4>;
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>