[PATCH net-next 1/2] dt-bindings: dpll: Add clock ID property

From
Ivan Vecera <ivecera@redhat.com>
Date
2025-07-17 17:11:18
Also in
lkml, netdev
Reply to
Ivan Vecera, 2025-07-17
Add property to specify the ID of the clock that the DPLL device
drives. The ID value represents Unique Clock Identified (EUI-64)
defined by IEEE 1588 standard.

The property is not mandatory because some DPLL devices can have
an ability to read this from HW. The situation is very similar
to network controllers without assigned MAC address.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
 Documentation/devicetree/bindings/dpll/dpll-device.yaml | 5 +++++
 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/dpll/dpll-device.yaml b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
index fb8d7a9a3693f..8e4ffe8ca279c 100644
--- a/Documentation/devicetree/bindings/dpll/dpll-device.yaml
+++ b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
@@ -27,6 +27,11 @@ properties:
   "#size-cells":
     const: 0
 
+  clock-id:
+    description: Specifies ID of the clock that the DPLL device drives
+    $ref: /schemas/types.yaml#/definitions/uint64
+    minimum: 1
+
   dpll-types:
     description: List of DPLL channel types, one per DPLL instance.
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
-- 
2.49.1
Thread (14 messages) 14 messages, 3 authors, last reply 2025-08-05
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help