Re: [PATCHv4 wireless-next 7/7] dt-bindings: net: wireless: rt2800: add
From: Rosen Penev <hidden>
Date: 2025-07-14 19:44:47
Also in:
linux-arm-kernel, linux-mediatek, linux-mips, linux-wireless, lkml
On Mon, Jul 14, 2025 at 12:27 AM Krzysztof Kozlowski [off-list ref] wrote:
On Sat, Jul 12, 2025 at 02:04:48PM -0700, Rosen Penev wrote:quoted
Add device-tree bindings for the RT2800 SOC wifi device found in older Ralink/Mediatek devices.Your subject was cut. Probably you wanted something like add "Realtek foo adapter" etc.
Not sure I follow.
quoted
Signed-off-by: Rosen Penev <redacted> --- .../bindings/net/wireless/ralink,rt2880.yaml | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/wireless/ralink,rt2880.yamldiff --git a/Documentation/devicetree/bindings/net/wireless/ralink,rt2880.yaml b/Documentation/devicetree/bindings/net/wireless/ralink,rt2880.yaml new file mode 100644 index 000000000000..a92aedf6ba01 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/ralink,rt2880.yaml@@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/ralink,rt2880.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink RT2880 wireless device + +maintainers: + - Stanislaw Gruszka <stf_xl@wp.pl> + +description: | + This node provides properties for configuring RT2880 SOC wifi devices. + The node is expected to be specified as a root node of the device. + +allOf: + - $ref: ieee80211.yaml# + +properties: + compatible: + enum: + - ralink,rt2880-wifi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - regWhy clocks are optional? SoC devices rarely work without a clock.
Before this patchset the code was doing 25 rt2x00dev->clk = clk_get(&pdev->dev, NULL); 24 if (IS_ERR(rt2x00dev->clk)) 23 rt2x00dev->clk = NULL; I changed it to use devm_clk_get_optional since that's what it looks like here. It's not returning under failure so I assume that means it's optional. OTOH all downstream OpenWrt users of this code (as well as mt7620a.dtsi here) do specify a clock. _optional might be a mistake. Maybe Stanislaw knows more.
Reviewed-by: Krzysztof Kozlowski <redacted> Best regards, Krzysztof