[PATCH v4 3/4] MIPS: dts: ralink: mt7628a: Update watchdog node according to bindings

From: Ezra Buehler <redacted>

Most notably, add the mediatek,sysctl phandle and remove the redundant
reset/interrupt-related properties from the watchdog node. This is in
line with the corresponding devicetree (mt7628an.dtsi) used by the
OpenWrt project.

This has been tested on the MT7688-based GARDENA smart Gateway.

Signed-off-by: Ezra Buehler <redacted>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 arch/mips/boot/dts/ralink/mt7628a.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
index 10221a41f02a..5d7a6cfa9e2b 100644
--- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi

@@ -134,13 +134,8 @@ pinmux_p4led_an_gpio: p4led-an-gpio-pins {
 
 		watchdog: watchdog@100 {
 			compatible = "mediatek,mt7621-wdt";
-			reg = <0x100 0x30>;
-
-			resets = <&sysc 8>;
-			reset-names = "wdt";
-
-			interrupt-parent = <&intc>;
-			interrupts = <24>;
+			reg = <0x100 0x100>;
+			mediatek,sysctl = <&sysc>;
 
 			status = "disabled";
 		};

-- 
2.43.0