Re: [PATCH net v4 2/4] dt-bindings: ethernet-phy: add MII-Lite phy interface type

On 6/30/25 06:58, Kamil Horák - 2N wrote:

Some Broadcom PHYs are capable to operate in simplified MII mode,
without TXER, RXER, CRS and COL signals as defined for the MII.
The MII-Lite mode can be used on most Ethernet controllers with full
MII interface by just leaving the input signals (RXER, CRS, COL)
inactive. The absence of COL signal makes half-duplex link modes
impossible but does not interfere with BroadR-Reach link modes on
Broadcom PHYs, because they are all full-duplex only.

Add new interface type "mii-lite" to phy-connection-type enum.

Signed-off-by: Kamil Horák - 2N <redacted>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian