On Thu, 19 Jun 2025 11:29:30 +0300
Andy Shevchenko [off-list ref] wrote:

On Thu, Jun 19, 2025 at 10:22 AM [off-list ref] wrote:

quoted

On Sat, 2025-06-14 at 00:50 +0300, Andy Shevchenko wrote:  

quoted

On Fri, Jun 13, 2025 at 4:02 PM [off-list ref] wrote:  

...

quoted

quoted

quoted

+MICROCHIP MCP9982 TEMPERATURE DRIVER
+M:     Victor Duicu [off-list ref]
+L:     linux-iio@vger.kernel.org
+S:     Supported
+F:
Documentation/devicetree/bindings/iio/temperature/microchip,mcp9982
.yaml
+F:     drivers/iio/temperature/mcp9982.c  

So, with the first patch only the dangling file will be present
without record in MAINTAINERS. Please, make sure that your DT schema
file is in MAINTAINERS.  

Are you referring here to the file sysfs-bus-iio-temperature-mcp9982?
This file was in v2 where there were a few custom attributes. In v3
I removed them, so the driver currently doesn't have custom attributes.
Should I had added it to the files in MAINTAINERS?  

You should have added the file to the MAINTAINERS in the same patch it
appears. Not in some arbitrary change afterwards.

Perhaps the confusion here is that Andy is talking about 2 lines above, not
the immediate line above this feedback.  So the one with the dt-binding
file.  If Victor was reading it as being about the .c file then
this whole cross discussion makes more sense!

Jonathan