On 2/25/2025 2:06 AM, Konrad Dybcio wrote:

On 24.02.2025 12:37 PM, Md Sadre Alam wrote:

quoted

Enable SPI NAND support for ipq9574 SoC.

Signed-off-by: Md Sadre Alam <redacted>
---
* Moved out ipq9574-rdp-common.dtsi changes into this patch from
   previous patch
---
  .../boot/dts/qcom/ipq9574-rdp-common.dtsi     | 43 +++++++++++++++++++
  1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
index ae12f069f26f..6d1e84301671 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi

@@ -139,6 +139,49 @@ gpio_leds_default: gpio-leds-default-state {
  		drive-strength = <8>;
  		bias-pull-up;
  	};
+
+	qpic_snand_default_state: qpic-snand-default-state {
+		clock-pins {
+			pins = "gpio5";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cs-pins {
+			pins = "gpio4";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qpic_snand_default_state>;
+	pinctrl-names = "default";
+	status = "okay";

Please add a newline before status

Ok, will do in next revision.

Reviewed-by: Konrad Dybcio <redacted>

Konrad