On 25/02/2025 09:48, Clément Le Goffic wrote:

This patch introduce the driver for the Hardware Debug Port available on

Please do not use "This commit/patch/change", but imperative mood. See
longer explanation here:
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95

STM32MP platforms. The HDP allows the observation of internal SoC
signals by using multiplexers. Each HDP port can provide up to 16
internal signals (one of them can be software controlled as a GPO)

....

+
+static int stm32_hdp_suspend(struct device *dev)
+{
+	struct stm32_hdp *hdp = dev_get_drvdata(dev);
+
+	hdp->gposet_conf = readl_relaxed(hdp->base + HDP_GPOSET);
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	clk_disable_unprepare(hdp->clk);
+
+	return 0;
+}
+
+static int stm32_hdp_resume(struct device *dev)
+{
+	struct stm32_hdp *hdp = dev_get_drvdata(dev);
+	int err;
+
+	err = clk_prepare_enable(hdp->clk);
+	if (err)
+		return dev_err_probe(hdp->dev, err, "Failed to prepare_enable clk");

That's wrong, it is not a probe path.

+
+	writel_relaxed(HDP_CTRL_ENABLE, hdp->base + HDP_CTRL);
+	writel_relaxed(hdp->gposet_conf, hdp->base + HDP_GPOSET);
+	writel_relaxed(hdp->mux_conf, hdp->base + HDP_MUX);
+
+	pinctrl_pm_select_default_state(dev);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_DEV_PM_OPS(stm32_hdp_pm_ops, stm32_hdp_suspend, stm32_hdp_resume);
+
+static struct platform_driver stm32_hdp_driver = {
+	.probe = stm32_hdp_probe,
+	.remove = stm32_hdp_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.pm = pm_sleep_ptr(&stm32_hdp_pm_ops),
+		.of_match_table = stm32_hdp_of_match,
+	}
+};
+
+module_platform_driver(stm32_hdp_driver);
+
+MODULE_ALIAS("platform:" DRIVER_NAME);

You should not need MODULE_ALIAS() in normal cases. If you need it,
usually it means your device ID table is wrong (e.g. misses either
entries or MODULE_DEVICE_TABLE()). MODULE_ALIAS() is not a substitute
for incomplete ID table.




Best regards,
Krzysztof