From: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>

Introduce 'FLEXCAN_QUIRK_SECONDARY_MB_IRQ' quirk to handle a FlexCAN
hardware module integration particularity where two ranges of mailboxes
are controlled by separate hardware interrupt lines.
The same 'flexcan_irq' handler is used for both separate mailbox interrupt
lines, with no other changes.

Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Vincent Mailhol <redacted>
---
 drivers/net/can/flexcan/flexcan-core.c | 24 +++++++++++++++++++++++-
 drivers/net/can/flexcan/flexcan.h      |  5 +++++
 2 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c
index ac1a860986df..3ae54305bf33 100644
--- a/drivers/net/can/flexcan/flexcan-core.c
+++ b/drivers/net/can/flexcan/flexcan-core.c

@@ -1762,14 +1762,25 @@ static int flexcan_open(struct net_device *dev)
 			goto out_free_irq_boff;
 	}
 
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SECONDARY_MB_IRQ) {
+		err = request_irq(priv->irq_secondary_mb,
+				  flexcan_irq, IRQF_SHARED, dev->name, dev);
+		if (err)
+			goto out_free_irq_err;
+	}
+
 	flexcan_chip_interrupts_enable(dev);
 
 	netif_start_queue(dev);
 
 	return 0;
 
+ out_free_irq_err:
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3)
+		free_irq(priv->irq_err, dev);
  out_free_irq_boff:
-	free_irq(priv->irq_boff, dev);
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3)
+		free_irq(priv->irq_boff, dev);
  out_free_irq:
 	free_irq(dev->irq, dev);
  out_can_rx_offload_disable:

@@ -1799,6 +1810,9 @@ static int flexcan_close(struct net_device *dev)
 		free_irq(priv->irq_boff, dev);
 	}
 
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SECONDARY_MB_IRQ)
+		free_irq(priv->irq_secondary_mb, dev);
+