Hi Mark,

On 03.02.25 8:57 PM, Mark Brown wrote:

On Wed, 18 Dec 2024 16:27:23 +0100, Frieder Schrempf wrote:

quoted

This is a follow-up of [1].

The main objective of this is to fix the PCA9450 driver to
use the correct control register for the LDO5 regulator.

Currently the control register to use for LDO5 is hardcoded to
LDO5CTRL_H. This is wrong for two reasons:

[...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/9] dt-bindings: regulator: pca9450: Add properties for handling LDO5
      commit: f9cbf56b0a1966d977df87d15a5bdbff2c342062
[2/9] arm64: dts: imx8mp-skov-reva: Use hardware signal for SD card VSELECT
      commit: b5ec74c2aec76fbdff9bc16951455602e11902bf
[3/9] Revert "regulator: pca9450: Add SD_VSEL GPIO for LDO5"
      commit: c73be62caabbec6629689c705aea65e5ce364d5d
[4/9] regulator: pca9450: Fix control register for LDO5
      commit: 3ce6f4f943ddd9edc03e450a2a0d89cb025b165b
[5/9] regulator: pca9450: Fix enable register for LDO5
      commit: f5aab0438ef17f01c5ecd25e61ae6a03f82a4586

Thanks for picking up these patches. Meanwhile Shawn has applied patch 2
and 7-9 on his side. What about patch 6? Is there a specific reason why
this was left out?

Thanks
Frieder