On 1.02.2025 10:18 AM, Dmitry Baryshkov wrote:
Add support for the onboard WCN3950 BT/WiFi chip. Corresponding firmware
has been merged to linux-firmware and should be available in the next
release.
Bluetooth: hci0: setting up wcn399x
Bluetooth: hci0: QCA Product ID :0x0000000f
Bluetooth: hci0: QCA SOC Version :0x40070120
Bluetooth: hci0: QCA ROM Version :0x00000102
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x01200102
Bluetooth: hci0: QCA Downloading qca/cmbtfw12.tlv
Bluetooth: hci0: QCA Downloading qca/cmnv12.bin
Bluetooth: hci0: QCA setup on UART is completed
Signed-off-by: Dmitry Baryshkov <redacted>
---
[...]
quoted hunk ↗ jump to hunk
+&uart3 {
+ interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
You need to either /delete-property/ interrupts, or define
interrupts-extended in the base dt
Though thinking about it years after, I'm not super impresesed that
we have to hardcode what always is the UART_RX gpio manually, every time
quoted hunk ↗ jump to hunk
+ pinctrl-0 = <&uart3_default>;
+ pinctrl-1 = <&uart3_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
Please add a newline before status
Konrad