[PATCH v6 07/10] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
From: Andrea della Porta <andrea.porta@suse.com>
Date: 2025-01-13 14:57:32
Also in:
linux-arm-kernel, linux-clk, linux-gpio, linux-pci, lkml
Subsystem:
raspberry pi rp1 pci driver, the rest · Maintainers:
Andrea della Porta, Linus Torvalds
RaspberryPi RP1 is a multi function PCI endpoint device that exposes several subperipherals via PCI BAR. Add a dtb overlay that will be compiled into a binary blob and linked in the RP1 driver. This overlay offers just minimal support to represent the RP1 device itself, the sub-peripherals will be added by future patches. Signed-off-by: Andrea della Porta <andrea.porta@suse.com> --- NOTE: this patch should be taken by the same maintainer that will take "[PATCH v6 08/10] misc: rp1: RaspberryPi RP1 misc driver", since they are closely related in terms of compiling. MAINTAINERS | 1 + arch/arm64/boot/dts/broadcom/rp1.dtso | 58 +++++++++++++++++++++++++++ 2 files changed, 59 insertions(+) create mode 100644 arch/arm64/boot/dts/broadcom/rp1.dtso
diff --git a/MAINTAINERS b/MAINTAINERS
index 9b8e87b8d6de..fbdd8594aa7e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS@@ -19577,6 +19577,7 @@ F: drivers/media/platform/raspberrypi/rp1-cfe/ RASPBERRY PI RP1 PCI DRIVER M: Andrea della Porta <andrea.porta@suse.com> S: Maintained +F: arch/arm64/boot/dts/broadcom/rp1.dtso F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml
diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso
new file mode 100644
index 000000000000..cdff061e2750
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1.dtso@@ -0,0 +1,58 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/raspberrypi,rp1-clocks.h> + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target-path=""; + __overlay__ { + compatible = "pci1de4,1"; + #address-cells = <3>; + #size-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + pci_ep_bus: pci-ep-bus@1 { + compatible = "simple-bus"; + ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>; + dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>; + #address-cells = <2>; + #size-cells = <2>; + + rp1_clocks: clocks@40018000 { + compatible = "raspberrypi,rp1-clocks"; + reg = <0x00 0x40018000 0x0 0x10038>; + #clock-cells = <1>; + clocks = <&clk_rp1_xosc>; + assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>, + <&rp1_clocks RP1_PLL_SYS>, + <&rp1_clocks RP1_PLL_SYS_SEC>, + <&rp1_clocks RP1_CLK_SYS>; + assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE + <200000000>, // RP1_PLL_SYS + <125000000>, // RP1_PLL_SYS_SEC + <200000000>; // RP1_CLK_SYS + }; + + rp1_gpio: pinctrl@400d0000 { + compatible = "raspberrypi,rp1-gpio"; + reg = <0x00 0x400d0000 0x0 0xc000>, + <0x00 0x400e0000 0x0 0xc000>, + <0x00 0x400f0000 0x0 0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <1 IRQ_TYPE_LEVEL_HIGH>, + <2 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + }; +};
--
2.35.3