On Wed, Dec 25, 2024 at 08:50:17PM +0100, Marc Kleine-Budde wrote:
On 19.12.2024 20:57:52, Markus Schneider-Pargmann wrote:
quoted
m_can can be a wakeup source on some devices. Especially on some of the
am62* SoCs pins, connected to m_can in the mcu, can be used to wakeup
the SoC.
The wakeup-source property defines on which devices m_can can be used
for wakeup and in which power states.
The pins associated with m_can have to have a special configuration to
be able to wakeup the SoC. This configuration is described in the wakeup
pinctrl state while the default state describes the default
configuration.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
The DTBS check fails:
| $ make CHECK_DTBS=y ti/k3-am625-beagleplay.dtb
| DTC [C] arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb
| arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: can@4e08000: wakeup-source: 'oneOf' conditional failed, one must be fixed:
| ['suspend', 'poweroff'] is not of type 'boolean'
| ['suspend', 'poweroff'] is too long
| from schema $id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml#
| arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: can@4e08000: wakeup-source: ['suspend', 'poweroff'] is not of type 'boolean'
| from schema $id: http://devicetree.org/schemas/wakeup-source.yaml#
| arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: can@4e18000: wakeup-source: 'oneOf' conditional failed, one must be fixed:
| ['suspend', 'poweroff'] is not of type 'boolean'
| ['suspend', 'poweroff'] is too long
| from schema $id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml#
| arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: can@4e18000: wakeup-source: ['suspend', 'poweroff'] is not of type 'boolean'
| from schema $id: http://devicetree.org/schemas/wakeup-source.yaml#
Thanks, the bot also notified me about this issue. I wasn't able to
solve it without updating the dt-schema, so I submitted a pull request
there:
https://github.com/devicetree-org/dt-schema/pull/150
Best
Markus