The ds90ub960 driver currently uses a list of i2c_client structs to keep
track of used I2C address translator (ATR) alias slots for each RX port.

Keeping these i2c_client structs in the alias slot list isn't actually
needed, the driver only needs to know the client address for each slot.

Convert the aliased_clients list to a list of aliased client addresses.
This will allow removing the "client" parameter from the i2c-atr callbacks
in a future patch.

Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
  drivers/media/i2c/ds90ub960.c | 18 +++++++++---------
  1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index 33f362a008757578e4c96e6ea7bed2e590776d8d..7534ddf2079fef466d3a114f0be98599427639fa 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c

@@ -467,7 +467,7 @@ struct ub960_rxport {
  		};
  	} eq;
  
-	const struct i2c_client *aliased_clients[UB960_MAX_PORT_ALIASES];
+	u16 aliased_addrs[UB960_MAX_PORT_ALIASES];
  };
  
  struct ub960_asd {

@@ -1031,17 +1031,17 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id,
  	struct device *dev = &priv->client->dev;
  	unsigned int reg_idx;
  
-	for (reg_idx = 0; reg_idx < ARRAY_SIZE(rxport->aliased_clients); reg_idx++) {
-		if (!rxport->aliased_clients[reg_idx])
+	for (reg_idx = 0; reg_idx < UB960_MAX_PORT_ALIASES; reg_idx++) {

+		if (!rxport->aliased_addrs[reg_idx])
  			break;
  	}
  
-	if (reg_idx == ARRAY_SIZE(rxport->aliased_clients)) {
+	if (reg_idx == UB960_MAX_PORT_ALIASES) {
  		dev_err(dev, "rx%u: alias pool exhausted\n", rxport->nport);
  		return -EADDRNOTAVAIL;
  	}
  
-	rxport->aliased_clients[reg_idx] = client;
+	rxport->aliased_addrs[reg_idx] = client->addr;
  
  	ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ID(reg_idx),
  			   client->addr << 1);

@@ -1062,18 +1062,18 @@ static void ub960_atr_detach_client(struct i2c_atr *atr, u32 chan_id,
  	struct device *dev = &priv->client->dev;
  	unsigned int reg_idx;
  
-	for (reg_idx = 0; reg_idx < ARRAY_SIZE(rxport->aliased_clients); reg_idx++) {
-		if (rxport->aliased_clients[reg_idx] == client)
+	for (reg_idx = 0; reg_idx < UB960_MAX_PORT_ALIASES; reg_idx++) {
+		if (rxport->aliased_addrs[reg_idx] == client->addr)
  			break;
  	}
  
-	if (reg_idx == ARRAY_SIZE(rxport->aliased_clients)) {
+	if (reg_idx == UB960_MAX_PORT_ALIASES) {
  		dev_err(dev, "rx%u: client 0x%02x is not mapped!\n",
  			rxport->nport, client->addr);
  		return;
  	}
  
-	rxport->aliased_clients[reg_idx] = NULL;
+	rxport->aliased_addrs[reg_idx] = 0;
  
  	ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ALIAS(reg_idx), 0);